Product ID:P7002 PLASTISOL
MSDS Date:10/22/1991
FSC:8030
NIIN:01-332-3771
MSDS Number: BQYPD

QCM COMPANY

930 SO. CENTRAL AVE.
KENT, WA 98032
US

Emergency Phone: 800-424-9300

Info Phone: 206-859-0933

Preparer: ROY WHEELDON

Cage: 8L872

Q C M CO

KENT, WA 98032-6105 US

Telephone: 253-859-0933, FAX 253-859-0935

Cage: 8L872

VINYL CHLORIDE MONOMER

CAS: 75-01-4

RTECS: KU9625000

Fraction By Weight: <.003%

OSHA PEL SEE 1910.1017

ACGIH TLV: 5 PPM, A1; 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

PHTHALATE PLASTICIZER

OSHA PEL NOT HAZARDOUS

ACGIH TLV: NOT HAZARDOUS

EPOXIDIZED SOYBEAN OIL

OSHA PEL NOT HAZARDOUS

ACGIH TLV: NOT HAZARDOUS

PVC RESIN

CAS: 9002-86-2

OSHA PEL NOT HAZARDOUS

ACGIH TLV: NOT HAZARDOUS

STABILIZER

OSHA PEL NOT HAZARDOUS

ACGIH TLV: NOT HAZARDOUS

ORGANIC PIGMENT

OSHA PEL NOT HAZARDOUS

ACGIH TLV: NOT HAZARDOUS

ORGANIC PIGMENT (NOT HAZARDOUS)

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO

First Aid:EYE: MAY CAUSE IRRITATION. FLUSH WITH WATER FOR 15 MINUTES.
SKIN: CAN CAUSE SLIGHT IRRITATION. WASH WITH SOAP AND WATER.
INHALATION: SMOKE SHOULD BE VENTILATED IF HEAT PROCESSED. IF
EXCESSIVE INHALATI ON, REMOVE TO FRESH AIR. INGESTION: CANCAUSE
GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING AND DIARRHEA. CONSULT
A PHYSICIAN.

Flash Point:>350F,>177C
Extinguishing Media:DRY CHEMICAL, REGULAR FOAM OR WATER FOG.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS IF
IGNITED.
Unusual Fire/Explosion Hazard:TOXIC GASES CAN FORM - CARBON DIOXIDE,
CARBON MONOXIDE, VARIOUS HYDROCARBONS.

Spill Release Procedures:SMALL: ABSORB ON VERMICULITE OR FLOOR DRY.
LARGE: PUMP TO SALVAGE TANK.

Handling and Storage Precautions:CONTAINERS MAY BE HAZARDOUS WHEN
EMPTIED DUE TO VAPOR BUILD-UP. STORE BETWEEN 50F AND 90F, AWAY FROM
HEAT OR FLAME.
Other Precautions:ALL HAZARD PRECAUTIONS IN THE DATA SHEET MUST BE
OBSERVED.

Respiratory Protection:RECOMMENDED IF LOCAL EXHAUST. NIOSH APPROVED.
Ventilation:LOCAL EXHAUST: RECOMMENDED FOR HEAT PROCESSING. SPECIAL:
MECAHNICAL (GENERAL) RECOMMENDED.
Protective Gloves:POLYETHYLENE TYPE.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:WASH WITH SOAP AND WATER IF CONTACT WITH
SKIN. WASH CONTAMINATED CLOTHING BEFORE RE-USE.
Supplemental Safety and Health

Spec Gravity:(H20=1) 1.1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VARIOUS COLORED LIQUID - VISCOUS.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
VARIOUS HYDROCARBONS, HYDROGEN CHLORIDE.

Waste Disposal Methods:INCINERATE ACCORDING TO LOCAL AND FEDERAL
STANDARDS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.